Cijev PE-RT IVAR 16 × 2 mm za podno grijanje – kisikovna barijera EVOH, bobina 500 m
Kod: 70016500PDetaljan opis proizvoda
Cijev IVAR.PE-RT 16 × 2 je fleksibilna plastična cijev za razvod toplinske toka poda. Proizvodi se od polietilena s povećanom toplinskom otpornošću (PE-RT) u petoslojnoj konstrukciji s difuzionom kisikovom barijerom EVOH i odgovara normi EN ISO 22391. Dostupna je u kolutu dužine 500 m, crvena boja.
Svojstva
- spoljašnji prečnik 16 mm, debljina zida 2 mm, unutrašnji prečnik 12 mm
- zapremina vode 0,113 l po metru
- tlakova klasa PN 6 pri 90 °C i PN 10 pri 60 °C
- propustnost kisika pri 40 °C najviše 0,32 g/m³ dnevno
- koeficijent hrapavosti 0,007 mm, toplinska vodljivost 0,4 W/m·K
Cijev je elastična, dobro podnosi tlak na visokim temperaturama, ne korodira, ne zanosi vodeni kamen i ima visoku hemijsku otpornost. IVAR je preporučuje i za suhe sisteme poda toplinske toka s sistemskim pločama IVAR.ST 20 AL i IVAR.ST 30 AL. Cijevi se spajaju zavojnim priključcima IVAR.TP ili RP, odnosno pritiskanim fitingima IVAR.PT.
Veličina 17 × 2 mm dostupna je u kolutu 600 m pod kodom 70017600P.
Tehnički parametri
| Kod | 70016500P |
| Proizvođač | IVAR |
| Tip | IVAR.PE-RT |
| Veličina | 16 × 2 mm |
| Unutrašnji prečnik | 12 mm |
| Zapremina vode | 0,113 l/m |
| Materijal | PE-RT, petoslojno s kisikovom barijerom EVOH |
| Tlakova klasa | PN 6 pri 90 °C / PN 10 pri 60 °C |
| Propustnost kisika (40 °C) | maks. 0,32 g/m³ dnevno |
| Toplinska vodljivost | 0,4 W/m·K |
| Norma | EN ISO 22391 |
| Boja | crvena |
| Pakovanje | kolut 500 m |
Često postavljana pitanja
Koji tlak i temperaturu cijev izdrži?
Cijev ima tlakovu klasu PN 6 pri 90 °C i PN 10 pri 60 °C. Raspon radnih temperatura prema EN ISO 22391 je 20 do 90 °C.
Koje fitinge koristiti za spajanje cijevi?
Zavojne priključke IVAR.TP ili RP, odnosno pritiskane fitinge IVAR.PT.
Ima li cijev kisikovu barijeru?
Da, radi se o petoslojnoj cijevi PE-RT s difuzionom kisikovom barijerom EVOH. Propustnost kisika pri 40 °C je najviše 0,32 g/m³ dnevno.
Koliko vode sadrži cijev?
Cijev 16 × 2 mm ima unutrašnji prečnik 12 mm i na svaki metar sadrži 0,113 l vode.
Dodatni parametri
| Kategorija: | cijevi PEX, PE-RT |
|---|---|
| Jamstvo: | 2 godine |
| Dostupnost: | Na zalihi ili kod dobavljača |
| Šifra: | 70016500P |
| Proizvođač: | IVAR |
| Tip: | IVAR.PE-RT |
| Dimenzija: | 16 × 2 mm |
| Unutarnji promjer: | 12 mm |
| Volumen vode: | 0,113 l/m |
| Materijal: | PE-RT, peteroslojna s kisikovom barijerom EVOH |
| Tlačni razred: | PN 6 pri 90 °C / PN 10 pri 60 °C |
| Propusnost kisika (40 °C): | najviše 0,32 g/m³ na dan |
| Toplinska provodljivost: | 0,4 W/m·K |
| Norma: | EN ISO 22391 |
| Boja: | crvena |
| Pakiranje: | kolut 500 m |
Ocjena proizvoda
Budite prvi koji će objaviti članak na ovoj stavci!
Rasprava
Budite prvi koji će objaviti članak na ovoj stavci!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.