Začešljivačka IVAR.MP 5736 22x20/2 – prelaz iz cijevi ALPEX 20x2 na cijev Cu / C-STEEL Ø 22 mm
Kod: 512116MPCDetaljan opis proizvoda
Vstavni komad IVAR.MP 5736 u dimenziji 22x20/2 (kod 512116MPC) povezuje dva pritisnuta sustava: s jedne strane višeslojnu cijev ALPEX 20x2, s druge strane bakreni ili čelični vod IVAR.C-STEEL promjera 22 mm. Obje strane se pritiskom povezuju, prelaz ne zahtijeva međuklopku s navojem.
- strana ALPEX 20x2: pritisne kalupe s konturama B, BE, TH, F, H, R ili U
- strana Cu / C-STEEL Ø 22 mm: pritisne kalupe s konturama M, V ili SA
- maks. radni tlak PN 10, maks. temperatura +100 °C
- telom od niklovanog lahma CW617N, prsten od nehrđajuće čelike, brtva EPDM
Vstavni komad se koristi svuda gdje u jednom vodovodu ALPEX cijev s bakrenim ili čeličnim pritisnutim cijevima. Svaku stranu pritisnite kalupom s pravilnim profilom i dimenzijom; ALPEX cijev prije montaže okomito isječite, kalibrirajte i oštrite.
Tehnički parametri
| Kod | 512116MPC |
| Proizvođač | IVAR |
| Tip | IVAR.MP 5736 |
| Vrsta | pritisni vstavni komad ALPEX – Cu / C-STEEL |
| Dimenzija | 22x20/2 |
| Strana ALPEX | 20x2 mm |
| Strana Cu / C-STEEL | Ø 22 mm |
| Kalupi – strana ALPEX | B, BE, TH, F, H, R, U |
| Kalupi – strana Cu / C-STEEL | M, V, SA |
| Maks. tlak / temperatura | PN 10 / +100 °C |
| Materijal | niklovan lahm CW617N, nehrđajući prsten, brtva EPDM |
Česte pitanja
Koje cijevi vstavni komad 22x20/2 povezuje?
S jedne strane višeslojnu cijev ALPEX 20x2, s druge strane bakreni ili čelični vod IVAR.C-STEEL promjera 22 mm.
Koje pritisne kalupe treba koristiti?
Strana ALPEX se pritiskom povezuje kalupima s konturama B, BE, TH, F, H, R ili U, strana bakra ili čelika konturama M, V ili SA – uvijek u dimenziji odgovarajućoj datom vodu.
Koji su radni ograničenja spoja?
Vstavni komad je namijenjen za radni tlak do 10 bar (PN 10) i temperaturu do +100 °C. Telom je od niklovanog lahma CW617N, prsten od nehrđajuće čelike i brtva od EPDM.
Dodatni parametri
| Kategorija: | ravni nipli press - bakar |
|---|---|
| Jamstvo: | 2 godine |
| Dostupnost: | Na zalihi ili kod dobavljača |
| Šifra: | 512116MPC |
| Proizvođač: | IVAR |
| Tip: | IVAR.MP 5736 |
| Vrsta: | press spojnica ALPEX – Cu / C-STEEL |
| Dimenzija: | 22x20/2 |
| Strana ALPEX: | 20x2 mm |
| Strana Cu / C-STEEL: | Ø 22 mm |
| Čeljusti – strana ALPEX: | B, BE, TH, F, H, R, U |
| Čeljusti – strana Cu / C-STEEL: | M, V, SA |
| Maks. tlak / temperatura: | PN 10 / +100 °C |
| Materijal: | poniklana mjed CW617N, inox čahura, brtva EPDM |
Ocjena proizvoda
Budite prvi koji će objaviti članak na ovoj stavci!
Rasprava
Budite prvi koji će objaviti članak na ovoj stavci!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.