Modul za pripremu tople vode IVAR.T-FAST iT 30 PRO – 30 l/min
Kod: IVA49060780Detaljan opis proizvoda
Kompaktni, potpuno prethodno sastavljeni modul IVAR.T-FAST iT 30 PRO priprema toplu vodu protočno, tek u trenutku potrošnje. Energiju uzima iz akumulacijskog spremnika, solarnog sustava, kotla ili drugog izvora topline pa spremnik tople vode nije potreban.
- Maksimalni protok sekundarnim krugom 30 l/min, minimalni protok za aktivaciju 2,5 ± 0,3 l/min
- Pločasti izmjenjivač površine 1,62 m², maks. protok primarnim krugom 1800 l/h, pad tlaka na strani tople vode 0,65 bar
- Temperatura tople vode podešava se u rasponu 40 ÷ 55 °C termostatskom glavom, a primarnu cirkulacijsku crpku Wilo PARA SC 15/1-6 uključuje senzor protoka
- Maks. radni tlak 10 bar, maks. temperatura 90 °C, priključci 3/4″ Ž / 1″ M, dimenzije 610 × 410 × 260 mm, napajanje 230 V AC
Pri ugradnji su na dovodu hladne vode u izmjenjivač potrebni nepovratni ventil i ekspanzijska posuda, a radi zaštite modula i magnetski filtar IVAR.DIRTSTOP; pri tvrdoći vode iznad 25–30 °fH nužna je obrada vode. Cirkulacijski set IVAR.KIT iT 30 PRO nije u isporuci. Montažu i električni priključak treba prepustiti stručnoj osobi.
Tehnički podaci
| Šifra | IVA49060780 |
| Proizvođač | IVAR |
| Tip | IVAR.T-FAST iT 30 PRO |
| Maks. protok sekundarnog kruga | 30 l/min |
| Min. protok | 2,5 ± 0,3 l/min |
| Površina izmjenjivača | 1,62 m² |
| Maks. radni tlak | 10 bar |
| Maks. temperatura | 90 °C |
| Priključci | 3/4″ / 1″ (Ž / M) |
| Dimenzije | 610 × 410 × 260 mm |
| Napajanje | 230 V AC; 45 W |
Česta pitanja
Je li cirkulacijski set dio modula IVAR.T-FAST iT 30 PRO?
Ne. Set IVAR.KIT iT 30 PRO izborni je pribor i naručuje se zasebno.
Što treba osigurati na strani hladne vode?
Nepovratni ventil i ekspanzijsku posudu na dovodu hladne vode u izmjenjivač te magnetski filtar IVAR.DIRTSTOP za zaštitu modula. Pri tvrdoći iznad 25–30 °fH vodu treba obraditi.
Treba li uz modul spremnik tople vode?
Ne. Voda se zagrijava protočno u pločastom izmjenjivaču tek pri potrošnji, a energiju daje izvor topline, na primjer akumulacijski spremnik.
Dodatni parametri
| Kategorija: | stambene stanice IVAR.SAT |
|---|---|
| Jamstvo: | 2 godine |
| Šifra: | IVA49060780 |
| Proizvođač: | IVAR |
| Tip: | IVAR.T-FAST iT 30 PRO |
| Maks. protok sekundarnog kruga: | 30 l/min |
| Min. protok: | 2,5 ± 0,3 l/min |
| Površina izmjenjivača: | 1,62 m² |
| Maks. radni tlak: | 10 bar |
| Maks. temperatura: | 90 °C |
| Priključci: | 3/4″ / 1″ (Ž / M) |
| Dimenzije: | 610 × 410 × 260 mm |
| Napajanje: | 230 V AC; 45 W |
Ocjena proizvoda
Budite prvi koji će objaviti članak na ovoj stavci!
Rasprava
Budite prvi koji će objaviti članak na ovoj stavci!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
