Eshop roka 2025 s vykurovacou technikou

Loptasti ventil s filtrom - FILTAR BALL - 5/4"FF; klip IVAR.51F

Kod: 3903210000
Nije ocijenjeno Detalji ocjene
164,82 € –20 %
Vykurovacia technika Guľový uzáver voda s filtrom  - FILTER BALL - 5/4"FF; páčka
164,82 € –20 % 131,86 € / kom 107,20 € bez PDV-a Izračunaj cijenu:
Međunarodna dostava
Na zalihi kod dobavljača

Detaljne informacije

Detaljan opis proizvoda

Kuglasti ventil voda s filtrom - FILTAR BALL, IVAR.51F, dimenzije: 5/4" FF, pakiranje: 4 komada u vrećici / 8 komada u kutiji

 

  • PN 16 pri T = +100 °C, PN 10 pri T = +150 °C
  • mrežica IVAR.FM 028, porozitet 700 µm (0,7mm)
  • navoj unutrašnji – unutrašnji FF, izvedba štapić
  • materijal bakarina CW602N
  • bez silikona
  • ATEST za vodu za piće
  • zategnuti usijek

Često postavljana pitanja

  • Kako odabrati pravi tip i veličinu armature/ventila? Vodite se nazivnim pritiskom (PN) i radnom temperaturom (T) navedenim u tehničkim karakteristikama – moraju odgovarati ili premašiti stvarne radne uvijete Vašeg sustava, a dimenzija priključka mora odgovarati promjeru cijevi.
  • Kako ta armatura/ventil funkcioniše? Tačan princip rada (zatvaranje, regulacija pritiska, povratni tok itd.) zavisi od konkretnog tipa – detaljno objašnjenje funkcije možete pronaći gore kod ovog proizvoda.
  • Mora li montažu obaviti stručnjak? Kod jednostavnijih zatvarnih armatura može izvršiti i domaći majstor, kod regulacionih i sigurnosnih armatura (sigurnosni ventili, redukcijski ventili) uvijek preporučujemo stručnjaka, jer se radi o elementima s funkcijom sigurnosti.

Dodatni parametri

Kategorija: kuglasti ventili s filtrom
Jamstvo: 2 godine
Težina: 1.959 kg
EAN: 8016603086831
Vrsta filtra: kuglasti ventil s filtrom
Dimenzija navoja: 5/4"
Dostupnost: Na zalihi ili kod dobavljača
Zadnje ažuriranje cijene: 13.04.2026 1:09:15

Ocjena proizvoda

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje

Kako biste ocijenili ovaj proizvod? Odaberite 1 do 5 zvjezdica, pri čemu 1 označava najlošiju, a 5 najbolju ocjenu.

Rasprava

Nemojte ispunjavati ovo polje

Popis rasprava

M Avatar autora 12.10.2026 21:50
Ho bisogno di sostituire una valvola sulla mia caldaia e devo sapere se questa FILTRO BALL da 5/4" regge la pressione del mio impianto che è a 10 bar, oppure se rischio problemi con il materiale della maniglia.
A Avatar autora 12.10.2026 21:50
Questa valvola è certificata fino a PN 16, quindi copre tranquillamente i tuoi 10 bar, anche a temperature fino a 100 gradi. La maniglia è in ottone CW602N senza silicone ed è adatta per l'acqua potabile, quindi non ci sono rischi per la tua installazione. Se hai dubbi sul montaggio o su altre dimensioni, controlla sempre le specifiche tecniche nella descrizione del prodotto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.