Impulzni vodomer IVAR.IVLI DRY zavojni, suchobezni – 6/4" M, priključak Hirschmann
Kod: 120.090.40ADetaljan opis proizvoda
IVAR.IVLI DRY s kôdom 120.090.40A mjeri potrošnju vode i ujedno šalje impulze o trenutnom protoku. Zbog toga može upravljati proporcionalnim doziranjem pumpe IVAR.DOSAMATIC PPI A i PPI X5MA, koje se povezuju priključnim kablom s konektorom Hirschmann duljine otprilike 3 m. Radi se o sušni vijčani izvedbe s certifikacijom MID i mjerilnim rasponom R80.
Specifikacije za dimenziju 6/4"
- spajanje 6/4" vanjski vijak, DN 40
- maksimalni protok 20 m³/h, nominalni 10 m³/h, minimalni 200 l/h
- tlakova klasa PN 16
- temperatura vode 5–40 °C, temperatura okoline 5–50 °C
- duljine prema tehničkom crtežu L = 300 mm, l = 440 mm
Impulsni izlaz
Tehnički list navodi 4 impulsa za svaki protjecani litar vode; opis proizvođača za veće dimenzije spominje i 1 impuls za 10 litara. Prije podešavanja dozirajuće pumpe, stoga provjerite koliko impulsa vaš vodomer koristi.
Serija IVLI DRY se proizvodi u dimenzijama 1/2", 3/4", 1", 5/4", 6/4" i 2". Montaža u vodovodni sustav treba biti izvršena instalaterom.
Tehnički parametri
| Kôd | 120.090.40A |
| Značka | IVAR |
| Tip | IVAR.IVLI DRY |
| Izvedba | vijčana, sušna |
| Spajanje | 6/4" M, DN 40 |
| Maks. protok | 20 m³/h |
| Nominalni protok | 10 m³/h |
| Min. protok | 200 l/h |
| Tlakova klasa | PN 16 |
| Temperatura vode / okoline | 5–40 °C / 5–50 °C |
| Certifikacija | MID, mjerilni raspon R80 |
| Kabel | cca 3 m, konektor Hirschmann |
| Duljina L / l | 300 / 440 mm |
Često postavljana pitanja
S kojim dozirajućim pumpama vodomer funkcioniše?
S pumpama IVAR.DOSAMATIC PPI A i PPI X5MA, koje se povezuju kablom s konektorom Hirschmann. Kabel ima duljinu otprilike 3 m.
Koliko impulsa vodomer daje?
Tehnički list navodi 4 impulsa po litru, opis proizvođača za veće dimenzije i 1 impuls po 10 litara. Prije podešavanja pumpe provjerite vrijednost.
Koji protok vodomer 6/4" može podnijeti?
Nominalno 10 m³/h i maksimalno 20 m³/h; minimalni protok prema tehničkom listu je 200 l/h.
Dodatni parametri
| Kategorija: | dozirne pumpe |
|---|---|
| Jamstvo: | 2 godine |
| Dostupnost: | Na zalihi ili kod dobavljača |
| Šifra: | 120.090.40A |
| Marka: | IVAR |
| Tip: | IVAR.IVLI DRY |
| Izvedba: | s navojem, suhi brojčanik |
| Priključak: | 6/4" VN, DN 40 |
| Najveći protok: | 20 m³/h |
| Nazivni protok: | 10 m³/h |
| Najmanji protok: | 200 l/h |
| Tlačna klasa: | PN 16 |
| Temperatura vode / okoline: | 5–40 °C / 5–50 °C |
| Certifikat: | MID, mjerni raspon R80 |
| Kabel: | oko 3 m, Hirschmann konektor |
| Duljina L / l: | 300 / 440 mm |
Ocjena proizvoda
Budite prvi koji će objaviti članak na ovoj stavci!
Rasprava
Budite prvi koji će objaviti članak na ovoj stavci!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.