Eshop roka 2025 s vykurovacou technikou

Horizontalni distribucijski razdjelnik za kotlovske module IVAR.HC-DN 65 2 modula

Kod: IVA49043690
Nije ocijenjeno Detalji ocjene
2 863,44 € –20 %
Horizontálny distribučný rozdeľovač pre kotlové moduly IVAR.HC-DN 65 2 moduly
2 863,44 € –20 % 2 290,75 € / kom 1 862,40 € bez PDV-a Izračunaj cijenu:
Međunarodna dostava
Po narudžbi (1-2 tjedna)

Detaljne informacije

Detaljan opis proizvoda

Razdjelnik IVAR.HC-DN 65 (IVA49043690) je valjkasti razdjelnik s dvije komore i toplinskom izolacijom za priključak modula IVAR.S-300 i IVAR.TV3-300 DN 65. Broj modula koji se mogu priključiti: 2. Proizvođač ga predviđa za sustave grijanja i hlađenja sa zatvorenim vodenim krugom; zajedno s hidrauličkom skretnicom IVAR.HS 220/325 čini cjelovit sklop, a priključni kompleti CONNECTA omogućuju različite rasporede, uključujući kutni.

Tehnički podaci

  • Broj priključivih modula: 2
  • Prirubnice (sekundarni / primarni krug): DN 65 / DN 150
  • Maks. snaga (pri ΔT 20 K): 1 600 kW
  • Maks. protok: 70 000 l/h
  • Maks. radni tlak: 10 bar
  • Maks. radna temperatura: 100 °C
  • Materijal: čelik Fe EN 10217-1, izolacija EPP

Isporučuje se s tijelom razdjelnika i toplinskom izolacijom; priključni kompleti, podni držači i prirubnički dodaci naručuju se zasebno. Ugradnju i puštanje u rad povjerite stručnoj tvrtki.

Tehnički podaci

ŠifraIVA49043690
ProizvođačIVAR
TipIVAR.HC-DN 65
Broj priključivih modula2
Prirubnice (sekundarni / primarni krug)DN 65 / DN 150
Maks. snaga (pri ΔT 20 K)1 600 kW
Maks. protok70 000 l/h
Maks. radni tlak10 bar
Maks. radna temperatura100 °C
Materijalčelik Fe EN 10217-1, izolacija EPP

Česta pitanja

Koju snagu i protok podnosi razdjelnik IVAR.HC-DN 65?
Prema tehničkom listu do 1 600 kW pri ΔT 20 K i protok 70 000 l/h; maksimalni radni tlak je 10 bar, a temperatura +100 °C.

Koji se moduli mogu priključiti na razdjelnik?
Kotlovski moduli IVAR.S-300 i IVAR.TV3-300 veličine DN 65; tip IVAR.HC-DN 65 predviđen je za 2 modula.

Dodatni parametri

Kategorija: horizontalni distribucijski razdjelnik - za pojedine kotlovske module KZ
Jamstvo: 2 godine
Šifra: IVA49043690
Proizvođač: IVAR
Tip: IVAR.HC-DN 65
Broj priključivih modula: 2
Prirubnice (sekundarni / primarni krug): DN 65 / DN 150
Maks. snaga (pri ΔT 20 K): 1 600 kW
Maks. protok: 70 000 l/h
Maks. radni tlak: 10 bar
Maks. radna temperatura: 100 °C
Materijal: čelik Fe EN 10217-1, izolacija EPP

Ocjena proizvoda

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje

Kako biste ocijenili ovaj proizvod? Odaberite 1 do 5 zvjezdica, pri čemu 1 označava najlošiju, a 5 najbolju ocjenu.

Rasprava

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.