Eshop roka 2025 s vykurovacou technikou

Fleksibilno crijevo s opletom od nehrđajućeg čelika - 2"FF (50x65); 50cm IVAR.2512

Kod: 25126050
Nije ocijenjeno Detalji ocjene
121,28 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez  - 2"FF (50x65); 50cm
121,28 € –20 % 97,02 € / kom 78,88 € bez PDV-a Izračunaj cijenu:
Međunarodna dostava
Na zalihi kod dobavljača

Detaljne informacije

Detaljan opis proizvoda

Flexi hadica opletenje nerez, IVAR.2512, dimenzije: 2" FF (50 x 65), duljina: 50 cm 
 
  • PN 6, T = +110 °C
  • navoj unutarnji - unutarnji FF
  • ATEST za vodu za piće, RÚVZ Poprad

 

Napomena: 
Duljine 30 i 70 cm po narudžbi, vrijednosti u zagradama označavaju unutarnji i vanjski promjer cijevi u mm.

 

Česta pitanja

  • Kako odabrati pravi tip i veličinu armature/ventila? Vodite se nazivnim tlakom (PN) i radnom temperaturom (T) navedenim u tehničkim karakteristikama - moraju odgovarati ili premašivati stvarne radne uvjete vašeg sustava, a dimenzija priključka mora odgovarati promjeru cijevi.
  • Kako ta armatura/ventil funkcioniše? Tačan princip rada (zatvaranje, regulacija tlaka, povratni tok itd.) zavisi od konkretnog tipa - detaljno objašnjenje funkcije možete pronaći gore kod ovog proizvoda.
  • Je li montaža obavezno izvršena od strane stručnjaka? Kod jednostavnijih zatvarajućih armatura može izvršiti i domaćin, kod regulacionih i sigurnosnih armatura (sigurnosni ventili, redukcioni ventili) uvijek preporučujemo stručnjaka, jer se radi o elementima s funkcijom sigurnosti.

Dodatni parametri

Kategorija: unutarnji - unutarnji navoj
Jamstvo: 2 godine
Težina: 1.93 kg
Dimenzija navoja: 2"
Duljina: 31 – 50 cm
Vrsta crijeva: pleteno inox crijevo
Vrsta priključka: unutarnji navoj
Dostupnost: Na zalihi ili kod dobavljača
Zadnje ažuriranje cijene: 13.04.2026 1:09:08

Ocjena proizvoda

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje

Kako biste ocijenili ovaj proizvod? Odaberite 1 do 5 zvjezdica, pri čemu 1 označava najlošiju, a 5 najbolju ocjenu.

Rasprava

Nemojte ispunjavati ovo polje

Popis rasprava

A Avatar autora 01.11.2026 22:52
Ciao, devo collegare un bollitore con attacchi da 2" femmina: questo flessibile da 50 cm regge una pressione di esercizio di 8 bar e temperature dell'acqua intorno ai 70°C senza problemi?
A Avatar autora 01.11.2026 22:52
Ciao Alberto, questo flessibile ha una PN 6, quindi la pressione massima di esercizio è 6 bar, non 8 - su questo punto ti consigliamo di verificare bene l'impianto prima di montarlo. La temperatura invece non è un problema, perché regge fino a 110°C. Le dimensioni sono 2" FF con diametro interno/esterno 50x65 mm, lunghezza 50 cm.
J Avatar autora 30.10.2026 08:34
Tisztelt Címzett!
A Avatar autora 30.10.2026 08:34
Tisztelt Jakab Úr! A Flexi tömlő rozsdamentes fonattal - 2"FF (50x65); 50cm termék a beszállító raktárában van, így Budapestre a szállítás kb. 3–7 nap. Az ára 35 504 Ft/db bruttó, tehát 2 db esetén 71 008 Ft bruttó. A szállítási költség a rendelés során a kosárban jelenik meg, a megrendelés véglegesítése előtt. A termék itt található: https://www.atria.hu/flexi-tomlo-rozsdamentes-fonattal-2-ff-50x65-50cm/

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.