Eshop roka 2025 s vykurovacou technikou

Fleksibilno crijevo s opletom od nehrđajućeg čelika - 1"FF (25x33); 100cm IVAR.2512

Kod: 25123499
Nije ocijenjeno Detalji ocjene
45,51 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez  - 1"FF (25x33); 100cm
45,51 € –20 % 36,41 € / kom 29,60 € bez PDV-a Izračunaj cijenu:
Međunarodna dostava
Na zalihi kod dobavljača

Detaljne informacije

Detaljan opis proizvoda

Flexi hadica opletenje nerez, IVAR.2512, rozmer: 1" FF (25 x 33), duljina: 100 cm 
 
  • PN 10, T = +110 °C
  • navoj unutarnji - unutarnji FF
  • ATEST za piću vodu, RÚVZ Poprad

 

Napomena: 
Duljine 30 i 70 cm po narudžbi, vrijednosti u zagradama daju unutarnji i vanjski promjer cijevi u mm.

Česta pitanja

  • Kako odabrati pravi tip i veličinu armature/ventila? Vodite se nazivnim tlakom (PN) i radnom temperaturom (T) navedenim u tehničkim karakteristikama - moraju odgovarati ili premašivati stvarne radne uvjete vašeg sustava, a dimenzija priključka mora odgovarati promjeru cijevi.
  • Kako ta armatura/ventil funkcioniše? Tačan princip rada (zatvaranje, regulacija tlaka, povratni tok itd.) zavisi od konkretnog tipa - detaljno objašnjenje funkcije možete pronaći gore kod ovog proizvoda.
  • Je li potrebno da montažu obavi stručnjak? Kod jednostavnijih zatvarnih armatura može montažu obaviti i domaćin, kod regulacionih i sigurnosnih armatura (sigurnosni ventili, redukcijski ventili) uvijek preporučujemo stručnjaka, jer se radi o elementima s funkcijom sigurnosti.

Dodatni parametri

Kategorija: unutarnji - unutarnji navoj
Jamstvo: 2 godine
Težina: 0.799 kg
Dimenzija navoja: 1"
Duljina: 51 – 100 cm
Vrsta crijeva: pleteno inox crijevo
Vrsta priključka: unutarnji navoj
Dostupnost: Na zalihi ili kod dobavljača
Zadnje ažuriranje cijene: 13.04.2026 1:05:47

Ocjena proizvoda

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje

Kako biste ocijenili ovaj proizvod? Odaberite 1 do 5 zvjezdica, pri čemu 1 označava najlošiju, a 5 najbolju ocjenu.

Rasprava

Nemojte ispunjavati ovo polje

Popis rasprava

N Avatar autora 21.11.2026 22:52
Hej med jer, jeg overvejer at anvende denne flexslange til tilslutning af min varmtvandsbeholder, hvor systemet typisk drives ved omkring 80 °C og et tryk på 6 bar. Kan jeg ud fra specifikationerne bekræfte, at slangen med PN 10 og T = +110 °C er tilstrækkeligt dimensioneret til denne anvendelse, samt at den er godkendt til drikkevand?
A Avatar autora 21.11.2026 22:52
Hej Nicolai. Ja, med PN 10 og en maks. driftstemperatur på +110 °C ligger dit system med 6 bar og 80 °C fint inden for slangens kapacitet. Den har desuden ATTEST til drikkevand fra RÚVZ Poprad, så den er også godkendt til den slags installation. Husk bare at tjekke, at gevindstørrelsen 1" FF passer til dine fittings på beholderen.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.