Eshop roka 2025 s vykurovacou technikou

Bezbednosni prstenasti sklop - 1" IVAR.BS 302

Kod: 302631
Prosječna ocjena proizvoda je 5,0 od 5 zvjezdica. 1 rating Detalji ocjene
145,14 € –20 %
Vykurovacia technika Bezpečnostníá pistná skupina - 1"
145,14 € –20 % 116,11 € / kom 94,40 € bez PDV-a Izračunaj cijenu:
Međunarodna dostava
Na zalihi (1 kom)

Detaljne informacije

Detaljan opis proizvoda

Bezbednosna sigurnosna grupa, IVAR.BS 302, dimenzija: 1"

 

  • PN 10, T = 0 °C do +110 °C
  • otvarni preklop sigurnosnog ventila 3 bar
  • opseg manometra 0 do 4 bar
  • materijal lajsna CB753S

 

Sastav grupe:

 

Napomena: Cijena uključuje izolaciju.

Često postavljana pitanja

  • Kako odabrati pravi tip i veličinu armature/ventila? Vodite se nazivnim tlakom (PN) i radnom temperaturom (T) navedenim u tehničkim karakteristikama - moraju odgovarati ili premašiti stvarne radne uvjete Vašeg sustava, a dimenzija priključka mora odgovarati promjeru cijevi.
  • Kako ova armatura/ventil funkcioniše? Tačan princip rada (zatvaranje, regulacija tlaka, povratni tok itd.) zavisi od konkretnog tipa - detaljno objašnjenje funkcije možete pronaći gore uz ovaj proizvod.
  • Mora li montažu obaviti stručnjak? Kod jednostavnijih zatvarnih armatura može izvršiti i domaćin, kod regulacionih i bezbednosnih armatura (sigurnosni ventili, redukcijski ventili) uvijek preporučujemo stručnjaka, jer se radi o elementima s bezbednosnom funkcijom.

Dodatni parametri

Kategorija: sigurnosne grupe
Jamstvo: 2 godine
Težina: 0.95 kg
EAN: 8016615002218
Dimenzija navoja: 1"
Vrsta armature: redukcijski / punionički ventil
Dostupnost: Na zalihi ili kod dobavljača
Zadnje ažuriranje cijene: 19.06.2026 8:37:09

Ocjena proizvoda

Budite prvi koji će objaviti članak na ovoj stavci!

Prosječna ocjena proizvoda je 5,0 od 5 zvjezdica. 1 rating
5
1x
4
0x
3
0x
2
0x
1
0x

Ostavite ocjenu

Nemojte ispunjavati ovo polje

Kako biste ocijenili ovaj proizvod? Odaberite 1 do 5 zvjezdica, pri čemu 1 označava najlošiju, a 5 najbolju ocjenu.

Popis ocjena

Rasprava

Nemojte ispunjavati ovo polje

Popis rasprava

D Avatar autora 21.11.2026 15:26
Salve, ho il bollitore dell'acqua calda e non so se questo coso va bene per quello o serve solo per la caldaia. Poi non ho capito se devo chiamare un tecnico per montarlo o posso provare io, visto che non sono tanto bravo con queste cose.
A Avatar autora 21.11.2026 15:26
Buongiorno Diego, questo gruppo di sicurezza va bene per impianti con tubo da 1", quindi controlli che il suo bollitore abbia proprio quel diametro di attacco, e che lavori entro i valori indicati (fino a 110°C e pressione PN10). Trattandosi di una valvola di sicurezza, le consigliamo di farla installare da un tecnico, perché è un componente che deve funzionare correttamente per la sicurezza dell'impianto. Per qualsiasi dubbio sulla compatibilità può anche scriverci una mail, saremo felici di aiutarla.
T Avatar autora 18.01.2022 09:26
:Dobrý deň, zaujímali by ma rozmery tejto poistnej skupiny, bohate stačí výška kvôli stiesneným priestorom. Vopred ďakujem za odpoveď.
A Avatar autora 18.01.2022 09:26
Dobrý deň. Posielam internetový link, kde nájdete potrebné info. Pekný deň. http://www.ivarcs.cz/?download=_/p.000405/ivar.bs-302_tl.pdf

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.