Eshop roka 2025 s vykurovacou technikou

Koljeno - 1/2"MxEK; poniklano IVAR.RR 4711 N

Kod: 500118
Nije ocijenjeno Detalji ocjene
7,06 € –19 %
Vykurovacia technika Koleno - 1/2"MxEK; nikl
7,06 € –19 % 5,65 € / kom 4,59 € bez PDV-a Izračunaj cijenu:
Međunarodna dostava
Na zalihi (12 kom)

Detaljne informacije

Detaljan opis proizvoda

Koleno, IVAR.RR 4711 N, dimenzije: 1/2" M x EK,  ambalaža: 40 u vreću / 320 u kutiji

 

  • PN 10, T = +120 °C
  • IVAR.RR 4711 N - navoj vanjski M - Eurokonus (EK)
  • materijal: cinkana bakra CW617N

Često postavljana pitanja

  • Kako odabrati pravu veličinu fitinza? Dimenzija navoja mora točno odgovarati navoju na cijevi ili armaturi na koju se fitinz priključuje - skraćenice FF (unutarnji-unutarnji navoj) i MF (vanjski-unutarnji) u nazivu označavaju vrstu navoja na pojedinim stranama.
  • Jeste li potreban tesni materijal kod montaže? Da, na navojne spojeve se standardno koristi teflon traka ili konoplja s tesnom pastom kako bi se osigurala savršena tesnost spoja.
  • Mora li montažu izvršiti stručnjak? Jednostavni navojni spojevi se mogu izvršiti kod osnovne vještine i kod domaćeg majstora, ali kod izmijene postojećeg voda (posebno plinskih) preporučujemo pozivanje instalatera koji će istovremeno provjeriti tesnost spoja.

Dodatni parametri

Kategorija: koljena EK
Jamstvo: 2 godine
Težina: 0.069 kg
Vrsta fitinga: koljeno / luk
Dimenzija navoja: 1/2"
Vrsta priključka: vanjski navoj, eurokonus (EK)
Dostupnost: Na zalihi ili kod dobavljača
Zadnje ažuriranje cijene: 13.04.2026 1:02:50

Ocjena proizvoda

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje

Kako biste ocijenili ovaj proizvod? Odaberite 1 do 5 zvjezdica, pri čemu 1 označava najlošiju, a 5 najbolju ocjenu.

Rasprava

Nemojte ispunjavati ovo polje

Popis rasprava

M Avatar autora 19.11.2026 15:39
Passt die Kolbenmuffe direkt an einen Eurokegel-Verteiler oder brauch ich da noch einen Übergang? Und hält die Nickelbeschichtung bei 1/2" MxEK auf Dauer bei Heizungswasser mit bis zu 120°C?
A Avatar autora 19.11.2026 15:39
Die EK-Seite ist ein Standard-Eurokegel, der passt direkt auf Verteiler oder Ventile mit diesem Anschluss, ohne Übergangsstück. Das Gewinde 1/2" M musst du natürlich mit dem Gegenstück abgleichen. Material ist nickelbeschichtetes Messing CW617N, ausgelegt für PN 10 und bis +120°C, das hält im normalen Heizungsbetrieb problemlos. Bei der Montage am besten Teflonband oder Hanf mit Dichtmasse verwenden, dann ist die Verbindung dicht.
Z Avatar autora 17.10.2026 07:52
Poštovani, planiram spojiti cijev s Eurokonusom na ovaj navojni dio, ali me zanima može li se koristiti i kod instalacija gdje je temperatura do 120 stupnjeva?
A Avatar autora 17.10.2026 07:52
Ovaj koleno izrađeno je od cinkane bakra CW617N i namijenjeno je za radne temperature do +120 °C, što znači da odgovara vašim potrebama. Za montažu samo ne zaboravite koristiti teflon traku ili konoplju s tesnom pastom kako bi spoj bio savršen. Ako imate dodatnih pitanja o drugim fitinzima iz naše ponude, tu smo vam na raspolaganju.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.